11N PRO TurboTenna WiFi Zone Booster Kit

The 11N PRO is a versatile antenna that can be configured to operate in the RECIEVE or the BROADCAST mode.

It has a good signal penetration characteristic and a range of READ MORE...

Extends WiFi coverage from a router to a zone

  • Built upon the 11N PRO Waveguide cAntenna
  • Extend router WiFi to a zone such as a garden or a conservatory shed
  • Phone and laptop in the zone get stronger WiFi signal
  • The zone could be hundreds of meters away from the antenna
  • Run a mouse over or touch the picture to see the change between WiFi reception and broadcast

11N PRO Zone Booster Full Kit

US$129.95

11N PRO Zone Booster DIY Kit

US$79.95

Description

The 11N PRO is a versatile antenna that can be configured to operate in the RECIEVE or the BROADCAST mode.

It has a good signal penetration characteristic and a range of 1 km line-of-sight driven by a WiFi adapter of 500mW.

This zone booster kit consists of both the 11N PRO Waveguide cAntenna with WiFi adapter and the Hotspot Upgrade kit.

You might have your own WiFi adapter and probably would like to get into some DIY work. That is absolutely fine with us.

In this scenerio you simply need to purchase the 11N PRO Waveguide cAntenna and the CnSR Hotspot right-to-use APP and get the rest of the hardware by yourself.

WiFi Extender vs WiFi Repeater

A WiFi Extender connects directly to your home router with a physical Ethernet cable and creates a new WiFi signal under the same or a different SSID name with security password. Both the Extender and the home router are typically meters apart.

A WiFi Repeater connects to a router wirelessly and rebroadcasts your existing WiFi signal under the same or a different SSID name with security password. Usually the router is several hundreds of meters away where running a physical Ethernet cable is deemed impractical. Example is the use of a Repeater to pick up WiFi on a caravan camp site for sharing it with phone and laptop in the vehicle.

Eithey way, you may connect to the existing SSID near the router or the new SSID as you walk into the new zone of coverage.

WiFi repeaters and WiFi extenders both improve your WiFi signal and range, however, they do it in different ways.

Packing List

11N PRO Zone Booster Full Kit
  • 11N PRO TurboTenna antenna with tripod
  • Dimensions: 30cm (L) x 9cm (Ø)
  • 6in N-male RP-SMA pigtail
  • 2 meters low-loss USB cable
  • High Power USB WiFi adapter
  • Raspberry Pi Zero
  • Right-To-Use CnSR Hotspot Upgrade Kit APP pre-installed on a 8GB micro SD memory card
  • USB Ethernet interface hub
  • Power supply module
11N PRO Zone Booster DIY Kit
  • 11N PRO TurboTenna antenna with tripod
  • Dimensions: 30cm (L) x 9cm (Ø)
  • 6in N-male RP-SMA pigtail
  • 2 meters low-loss USB cable
  • Right-To-Use CnSR Hotspot Upgrade Kit APP (software download)
  • USB Ethernet interface hub
  • Power supply module

:: Copyright ® 2020 DataCom Network Limited
The registered trademarks and logos belong to the respective companies.
:: Copyright ® 2021 DataCom Network Limited. The registered trademarks and logos belong to the respective companies.